Tsingtek COG LCD module LCD driver circuit is a low-voltage, micropower COMS circuit

Tsingtek COG LCD Module LCD driver circuit is a low-voltage, micropower COMS circuit, so we recommend not using any input terminal is connected to VDD or VSS, before you turn on the power, do not enter any signal, and to ensure that human , workstations and assembly equipment is properly grounded to prevent static electricity we recommend the following measures:
(1) LCD module assembly before, do not remove it from the bag. LCD module used packaging Bag is the result of anti-static treatment of special bags. Also with liquid crystal display module in the storage bag storage, or
Fully grounded in the storage container.
(2) When operating the liquid crystal display module,to always keep the operator fully grounded so that the body and the LCD module to maintain the same potential.
(3) the required equipment during operation to be fully grounded, especially the drive, must be well grounded, there is no leakage to avoid dry
(4) LCD module surface has a layer of protective film, it aims to avoid the LCD polarizing film scratches, stains and other contamination.
Please slowly peeling off the protective film LCD module. Peel off the protective film if fast will produce static electricity.
(5) Note that the humidity of the plant: Plant Humidity range: 50 ~ 60% RH