LCD panel

ER-OLED0.49-1W is the graphic OLED display module made of 64x32 individual white OLED pixels,diagonal is only 0.49 inch.The controller ic SSD1306,LCD panel communicates via I2C serial interface only,thanks to controller's built-in voltage generation,only a single 2.8V power supply is needed.TFT display modules Because the display makes its own light, no backlight is required. This reduces the power required to run the OLED and is why the display has such high contrast,extremely wide viewing angle and extremely operating temperature.The fpc is the soldering type,no need connector.Just solder the Character LCD Display on your PCB directly.

Character LCD Modules

Contrast Adjust & Temp Compensation Circuits
► Timing Diagrams for Read / Write
► Font Table: Built-in Character Generator
► Instruction Codes & Detailed Explanations
► 6800 / 8051 Microprocessor Interface
► Programming Special Characters
► Sample Initialization Code for Each Part
► 4-Bit Display Initialization Example
► 8-Bit Display Initialization Example
► LED Backlight: Constant Current Driver Improves Brightness Control
► LED Backlight: Series Resistors for Each Part
► Address Locations for Each Part
► Troubleshooting Tips
Character LCD Modules are Alphanumeric Dot Matrix LCD displays use Super Twisted Nematic (STN) and Film Compensated STN (FSTN) technology.TFT Display Module They have all of the driving and control circuitry packaged with the LCD glass, providing an easy to use digital interface to the user. The characters displayed usually have a fixed 5x7 pixel matrix used to display alpha-numeric text. The text characters displayed by these modules are controlled, and refreshed by,Character OLED Display the LCD Character Module so the user only needs to send simple ASCII characters to the Modules internal RAM. Blaze Display offers LCD module manufacturer from 1 line by 8 characters, to 4 lines by 40 characters.

Icd modules

OLED display advantages as:
1. LED or LCD crystal layer compared to, OLED organic plastic layer is thinner, lighter and more full flexibility.
2.OLED relatively light emitting layer, so its base layer material rich in flexibility can be used without the use of a rigid material. lcd graphic display modules plastic material, and the use of LED and LCD glass substrate.
3.OLED brighter than LED. The organic layer than the OLED corresponding LED in many thin inorganic crystals, and thus a conductive layer OLED and the emission layer may be a multilayer structure. In addition, LED and LCD glass as needed support, while the glass will absorb part of the light. custom lcd module is no need to use glass.